Werkz M6 IWB / AIWB Holster for Walther PDP with Streamlight TLR-7 / TLR-7A / TLR-7X, Left, Black

Built off of previous designs like the M2, the M6 is feature packed. The claw and muzzle bump help to reduce printing and enhance comfort, and accessory attachment holes allow for C-hooks, or even attaching a Radius Mag carrier, to run it “sidecar” style.

• Precision-Fit
• Adjustable Retention
• Concealment Claw
• Carry In Any Position IWB
• High Sweat-guard
• Optic Ready
• Threaded Barrel Drop-through
• Werkz and Third Party Accessory Support

Concealment Claw

The pistol grip is the most likely part to show through clothing. The concealment claw pushes against your belt and secures the pistol grip into your body. This enhances the holster's concealment capabilities and further stabilizes your firearm from unwanted movement. The concealment claw is removable.

Muzzle Bump

The muzzle bump keeps the gun from tipping out, and allows the holster to fit your body more naturally. This is more comfortable, more stable, and more concealable.

Modular Design

Designed for appendix carry, but easily reconfigured for 3 or 4 o’clock.

Carry Any Way You Want

The holster comes with a 1.5 inch belt clip that provides an easy and secure belt mount. It can be adjusted to a deep carry or forward cant position. You can swap the belt clip out for soft loops, c-hooks and more. Check related products below to see attachment options for this holster, or check our accessories.

VIDEO OVERVIEW

With Attached Radius Mag Carrier:

What other pistol mods are compatible with this holster?

Every holster supports suppressor height sights and threaded barrels. Select holsters (see product photos) have charging ports for rechargeable lights. Holsters that have an open bottom to support longer slide lengths also work with compensators.

How do I adjust retention?

You can control your retention with dual adjustment screws. Fine-tune them for your preferred balance between secure carry and a smooth draw.

Claw:

Based upon customer feedback, all M6 holsters now come with Claw 2. Other claw styles may be purchased separately.

What are my belt attachment options for this holster?

The holster comes with a 1.5 inch belt clip that provides an easy and secure belt mount. It can be adjusted to a deep carry, and has a wide range of cant adjustment. You can swap the belt clip out for soft loops, c-hooks, and more. Check related products below to see attachment options for this holster, or check our accessories.

Pistol Fit:
Made specifically for the following pistols, resulting in minimal extra bulk and the best possible fit.

This holster is also made for pistols with the same slide and frame profile as those listed above, and includes an open bottom for longer pistols to pass through. This means that the holster will additionally fit the following pistols; the pistol slide or rail may extend beyond the end of the holster for those listed here.

This holster is also made for pistols with the same slide and frame profile as those listed above. This means that the holster will additionally fit the following pistols; there may be extra holster material extending beyond the end of the muzzle for those listed here.

Light or Laser Fit:
This holster is made exactly to fit the following lights, lasers, or accessories. The holster is molded closely to the profile of these lights. Note that similar looking lights will not fit unless specifically mentioned on this page.

• TLR-7
• TLR-7A
• TLR-7X