Werkz Magnet + Shelf Kit

Make Ready

In a match every second counts, so be ready and crush the competition with a lightning fast load off the buzzer.

Who and What is this For?

Anyone who wants to Shoot competition from concealment. The magnet offers 2 key benefits:

• 1. Convenient spot to stow your first magazine for a stage, as well as the same spot to put your magazine that's in the gun during "unload and show clear".
• 2. Dedicated position to prep your first magazine for an even faster unloaded start.

Proprietary Shelf

• Indexes magazine in the same set 165 degree angle for consistent reloads.
• Supports weight of magazine better to stay on magnet (especially helpful with Glock mags).
• Shelf forces standard size double stack magazines to be slightly off-center of the magnet, so it is always pulling into the shelf for consistent placement.
• 3D Printed in USA with Nylon 12 manufactured via Multi-Jet Fusion.
• Can run without shelf, but highly recommend to run with it.
• Designed by Cole Hemphill with direct feedback from USPSA Master Class shooter Jamison Vogt.

Magnet

• Rare Earth Neodymium Magnet with 135 lbs of pulling force.
• 1.65" in Diameter
• Requires magazine to be a ferrous metal (OEM Glock mags with metal liner work too).
• *Warning* Keep away from pacemakers or anything else magnets should not get close to.

Proprietary Metal Clip

• For 1.5" gun belts.
• Our own metal clip design. Made in Idaho.
• Hole in clip allows access to mounting hardware for screw onto bridge, as well as mounting magnet onto clip.

What's Included

• 1x Magnet
• 1x Shelf
• 1x Werkz Metal Clip
• 2x Potlatch Screws 3mm (square nut)
• 2x Truss Head screws 5/16"
• 1x Chicago screw 1/4"
• 1x Oval head screw 5/16"

Installation and Setup

Watch our video here: