← All products
Velox

Velox M7 Holster for Glock G17, G19, etc.

as low as $100
Check if this fits your pistol Use the holster finder
Velox M7 Holster for Glock G17, G19, etc., photo 1 of 7 Velox M7 Holster for Glock G17, G19, etc., photo 2 of 7 Velox M7 Holster for Glock G17, G19, etc., photo 3 of 7 Velox M7 Holster for Glock G17, G19, etc., photo 4 of 7 Velox M7 Holster for Glock G17, G19, etc., photo 5 of 7 Velox M7 Holster for Glock G17, G19, etc., photo 6 of 7 Velox M7 Holster for Glock G17, G19, etc., photo 7 of 7

Running a compensator? Choose the next length up, so the cut covers the slide and the comp. When in doubt, go longer.

Mag carriers are designed to fit a variety of magazines, but are named after the most popular pistols on their compatibility list. Pick your pistol under Fitment to see which carrier fits it.

Check the fit before you buy: use the finder or the Fitment list below.

Save $10 when you bundle a light with a holster.

Bundle a light
  • Ships in 3 business days.
  • All holsters are built to order. Orders can only be canceled with a restocking fee.
  • Returns: in new condition, within 15 days of shipment. A 25% restocking fee applies, you pay return shipping, and shipping costs are not refunded.
Read the full terms

Add to this holster

Fitment

Compatibility Information

Which pistols does it fit?

Open your pistol's brand. The length to choose is shown next to each model.

⚠ WARNING: Werkz LLC holsters are precision-fit for specific handgun or handgun & light combinations. Only the specified item(s) are supported, as listed below. Read the Holster Safety Information before use.

Pistols (open a brand to see its models)

Glock47 models
  • G17 Gen39mm4.49"
  • G17 Gen49mm4.49"
  • G17 Gen4 MOS9mm4.49"
  • G17 Gen59mm4.49"
  • G17 Gen5 MOS9mm4.49"
  • G17 Gen69mm4.49"
  • G17 V9mm4.49"
  • G19 Gen39mm4.02"
  • G19 Gen49mm4.02"
  • G19 Gen4 MOS9mm4.02"
  • G19 Gen59mm4.02"
  • G19 Gen5 MOS9mm4.02"
  • G19 Gen69mm4.02"
  • G19 V9mm4.02"
  • G19X9mm4.02"
  • G19X V9mm4.02"
  • G22 Gen3.40 S&W4.49"
  • G22 Gen4.40 S&W4.49"
  • G23 Gen3.40 S&W4.02"
  • G23 Gen4.40 S&W4.02"
  • G24 Gen3.40 S&W5.31" (muzzle extends)
  • G26 Gen39mm4.02"
  • G26 Gen49mm4.02"
  • G26 Gen59mm4.02"
  • G26 V9mm4.02"
  • G27 Gen3.40 S&W4.02"
  • G27 Gen4.40 S&W4.02"
  • G31 Gen4.357 Sig4.49"
  • G32 Gen4.357 Sig4.02"
  • G33 Gen4.357 Sig4.02"
  • G34 Gen39mm5.31"
  • G34 Gen49mm5.31"
  • G34 Gen4 MOS9mm5.31"
  • G34 Gen59mm5.31"
  • G35 Gen3.40 S&W5.31"
  • G35 Gen4.40 S&W5.31"
  • G35 Gen4 MOS.40 S&W5.31"
  • G37 Gen3.45 GAP4.49"
  • G38 Gen3.45 GAP4.02"
  • G41 Gen4.45 ACP5.31"
  • G41 Gen4 MOS.45 ACP5.31"
  • G44.22 LR4.02"
  • G459mm4.02"
  • G45 Gen69mm4.02"
  • G45 MOS9mm4.02"
  • G45 V9mm4.02"
  • G47 Gen59mm4.49"
Shadow Systems5 models
  • DR9209mm4.49"
  • DR920P9mm5.31"
  • MR9209mm4.02"
  • MR920L9mm4.49"
  • XR9209mm4.02"

Muzzle extends past the holster

These pistols are longer than the longest length of this holster. Choose the length shown: the holster fits, and the muzzle extends past the end of the holster.

  • Glock G24 Gen35.31"

Brand names identify fit only. No affiliation or endorsement.

About this holster

See Fitment Section for Help choosing Variant.

Holsters are individually formed and cut to your exact length specifications. Please select the correct pistol variant for the best fit.

The Velox M7 is an outside-the-waistband holster optimized for competition or range use.

  • Get on target faster with a deeper slide cut.
  • Configure your perfect draw angle with the included Blade-Tech Tek Mount
  • Stand out with exclusive Velox camo holster pattern
  • Tune your draw with adjustable retention
  • Easily remove your holster using the included Tek-Mount.
  • Accessorize with your favorite Safariland or Blade Tech attachment
  • Easily mount accessories using Werkz patent-pending anti-rotate hardware
  • Cut to your specified pistol length to reduce bulk and cover your muzzle

The included flexible belt slide holds the pistol close to the body. The belt slide combined with the included Blade-Tech Tek-Mount allows you to carry at any angle.

Conveniently remove your holster with the included Tek-Mount.

Two ride height settings allow you to tune for a comfortable carry.

Available with or without additional magazine carrier and Tek-Lok.

Available in black or exclusive Velox camo.

Is this holster compatible with aftermarket accessories (Safariland, G-Code)?
Yes. The M7 comes ready to use with the Werkz Belt Slide, but it is also compatible with a wide range of industry-standard attachments, including Safariland (QLS, UBL, Paddle, Injection Molded Belt Loop), G-Code (Hanger #39), and many Blade Tech accessories.

How high does the holster ride?
Our included belt slide attachment places the holster at a standard height in the default "shipped to you" setting, but it can be dropped an inch lower on the same belt slide mount. If attached, the Safariland paddle does place the holster into a high-ride position. This can be mitigated by our drop attachment or another manufacturer's drop adapter.

Is this holster compatible with red dots?
Yes. The M7 is compatible with a wide range of optics.

What other common pistol modifications are compatible with this holster?
The M7 often supports suppressor-height sights, threaded barrels, and compensators. However, you must verify proper fit and function. Please refer to our safety information.

Is this holster concealable?
Yes, under the right conditions. The Velox M7 is best suited for range use but may be concealed under a jacket or loose shirt.

What positions can I wear this holster in?
The M7 is designed for outside-the-waistband on the hip.

What is the standard cant on this holster?
The Velox M7 is designed as a "straight drop" holster with no positive or negative cant. The included Tek Mount allow you to adjust cant at ten degree increments to suit your need. The Tek-Mount can also be adjusted up to 5 degrees on the included belt slide, which means you can set your holster at any angle for your perfect draw.

Does this holster have active duty retention?
No. This holster has passive click-in retention that can be adjusted with a screwdriver.

How can I adjust retention?
Retention is adjusted using a screwdriver on the retention adjustment screw.

What is it like to draw my firearm with this holster?
Fast and smooth. The trigger guard is undercut, so you can get a full grip, and the slide has a deeper cut to enable faster target acquisition.

How long should I expect this holster to last?
This holster is a robust piece of equipment, made from the highest-quality materials. Unlike leather or soft synthetics, it can be washed with soap and lukewarm water. With proper care and use, your holster will last as long as you want. Just be sure to:

  • Avoid excessive heat exposure (stovetops, radiators, dashboards in direct sunlight, etc.)
  • Use the correct pistol and light in your holster.

What do I do next?

  1. Check the list above to and confirm that you have selected the correct holster for your pistol. Not sure? Email us at [email protected].
  2. Add accessories such as OWB mag carrier, drop leg setup, belt slide, paddle, and more.
  3. Checkout. Get your holster ASAP, and carry your gun and light with confidence.