← Competition

Magnet + Shelf Kit

as low as $28
Magnet + Shelf Kit, photo 1 of 14 Magnet + Shelf Kit, photo 2 of 14 Magnet + Shelf Kit, photo 3 of 14 Magnet + Shelf Kit, photo 4 of 14 Magnet + Shelf Kit, photo 5 of 14 Magnet + Shelf Kit, photo 6 of 14 Magnet + Shelf Kit, photo 7 of 14 Magnet + Shelf Kit, photo 8 of 14 Magnet + Shelf Kit, photo 9 of 14 Magnet + Shelf Kit, photo 10 of 14 Magnet + Shelf Kit, photo 11 of 14 Magnet + Shelf Kit, photo 12 of 14 Magnet + Shelf Kit, photo 13 of 14 Magnet + Shelf Kit, photo 14 of 14
  • Ships in 3 business days.
  • Returns: in new condition, within 15 days of shipment. A 25% restocking fee applies, you pay return shipping, and shipping costs are not refunded.
Read the full terms

About this product

Make Ready

In a match every second counts, so be ready and crush the competition with a lightning fast load off the buzzer.

Who and What is this For?

Anyone who wants to Shoot competition from concealment. The magnet offers 2 key benefits:

  • 1. Convenient spot to stow your first magazine for a stage, as well as the same spot to put your magazine that's in the gun during "unload and show clear".
  • 2. Dedicated position to prep your first magazine for an even faster unloaded start.

Proprietary Shelf

  • Indexes magazine in the same set 165 degree angle for consistent reloads.
  • Supports weight of magazine better to stay on magnet (especially helpful with Glock mags).
  • Shelf forces standard size double stack magazines to be slightly off-center of the magnet, so it is always pulling into the shelf for consistent placement.
  • 3D Printed in USA with Nylon 12 manufactured via Multi-Jet Fusion.
  • Can run without shelf, but highly recommend to run with it.
  • Designed by Cole Hemphill with direct feedback from USPSA Master Class shooter Jamison Vogt.

Magnet

  • Rare Earth Neodymium Magnet with 135 lbs of pulling force.
  • 1.65" in Diameter
  • Requires magazine to be a ferrous metal (OEM Glock mags with metal liner work too).
  • *Warning* Keep away from pacemakers or anything else magnets should not get close to.

Proprietary Metal Clip

  • For 1.5" gun belts.
  • Our own metal clip design. Made in Idaho.
  • Hole in clip allows access to mounting hardware for screw onto bridge, as well as mounting magnet onto clip.

What's Included

  • 1x Magnet
  • 1x Shelf
  • 1x Werkz Metal Clip
  • 2x Potlatch Screws 3mm (square nut)
  • 2x Truss Head screws 5/16"
  • 1x Chicago screw 1/4"
  • 1x Oval head screw 5/16"

Installation and Setup