Werkz M6 IWB / AIWB Holster for Walther PDP with Streamlight TLR-7 HL-X

The M6 is a quality, comfortable, low-profile, precision fit holster for daily concealed carry of your pistol and light.

The M6 provides the features that modern shooters demand. The concealment claw and muzzle bump help reduce printing and enhance comfort. Precision design and manufacturing result in a perfect fit for your pistol and light. The included 1.5" belt clip supports both cant and carry height adjustment. The M6 holster can be further customized with optional accessories such as DCC clips, polymer c-hooks, snap straps, or even the Radius Mag carrier, to run it “sidecar” style.

Features

• Precision-Fit
• Adjustable Retention
• Concealment Claw
• Carry In Multiple Positions IWB
• High Sweat-guard
• Optic Ready
• Threaded Barrel Drop-through
• Werkz and Third Party Accessory Support

Concealment Claw

The pistol grip is the most likely part to show through clothing. The concealment claw pushes against your belt and secures the pistol grip into your body. This enhances the holster's concealment capabilities and further stabilizes your firearm from unwanted movement. The concealment claw is removable.

Conceal Inside the Waistband, Appendix Position (AIWB)

The holster comes with a 1.5 inch belt clip that provides an easy and secure belt mount. It can be adjusted to a fifteen different positions including two different carry heights. You can swap the belt clip out for soft loops, c-hooks, DCC clips, and more. Check related products below to see attachment options for this holster, or check our accessories.

Hip Carry Positions and Concealment

Now available in 5 different colors or patterns.

Optimize Your Carry with Available Accessories

FAQs

Q: What other pistol mods are compatible with this holster?
A: Every holster supports suppressor height sights and threaded barrels. Select holsters (see product photos) have charging ports for rechargeable lights. Most slide-profiled compensators or threaded barrels drop through without interference.

Q: How do I adjust retention?
A: You control retention with the dual adjustment screws that also attach the claw. Fine-tune them for your preferred balance between secure carry and a smooth draw.

Q: What are my belt attachment options for this holster?
A: The M6 comes with a 1.5" belt clip that provides a convenient and secure belt mount with multiple adjustment positions. You can swap the belt clip out for soft loops, c-hooks, DCC clips, and more. Check out related products or M6 accessories for more.

Compatibility List

Pistol Fit:
Made specifically for the following pistols, resulting in minimal extra bulk and the best possible fit.

This holster is also made for pistols with the same slide and frame profile as those listed above, and includes an open bottom for longer pistols to pass through. This means that the holster will additionally fit the following pistols; the pistol slide or rail may extend beyond the end of the holster for those listed here.

This holster is also made for pistols with the same slide and frame profile as those listed above. This means that the holster will additionally fit the following pistols; there may be extra holster material extending beyond the end of the muzzle for those listed here.

Light or Laser Fit:
This holster fits the following lights, though there will be some material past the end of the light bezel because the holster exactly fits lights with longer bezels.

• TLR-7
• TLR-7X
• TLR-7A

This holster is made exactly to fit the following lights, lasers, or accessories. The holster is molded closely to the profile of these lights. Note that similar looking lights will not fit unless specifically mentioned on this page.

• TLR-7 HL-X
• TLR-7 HL-X