Werkz M6 Outlier IWB Holster for Most Modern Pistols (Thumb Rest) with Surefire X300 / X300 Ultra / X300 Turbo

Multi-Fit Holster

Werkz has been striving to provide the widest selection of light bearing holsters possible. With customers running a huge variety of pistols, we wanted a way to serve you more quickly. While we wanted a holster that fit the widest variety of less-mainstream (or "outlier" pistols, if you will), we didn't want to sacrifice quality fit, feel, and "click-in" retention. To accomplish this end, we designed clearance for a variety of pistol frames and slides, but focused on a precise light fit. We have heard from customers that they don't want to have to fiddle with multiple elastic retention points, or end up with a product that allows so much pistol movement that weapon lights will turn on inside the holster. We accomplished all this and more in the Outlier.

This "universal holster" or "multi-fit holster" will allow you to run any one of a huge variety of pistols, whether hammer or striker fired. The holster is designed to cover all major manufacturer trigger guards, and clear many magazine releases. One potential advantage of the generous slide and frame clearance as that wear on your pistol's slide may be reduced versus tightly fitting holsters.

See below for the list of pistols that this holster is verified to fit. If you do not see your pistol, it has not been tested and thus is not supported. Such pistols must be used at your own risk.

The Outlier holsters will allow a little more "twist" and "rock" than our holsters designed for a specific pistol model. This is due to the extra clearance provided for many different slide heights and widths. As with all holsters, you must test and verify suitability for your gear and mission.

The M6 is a quality, comfortable, low-profile, precision fit holster for daily concealed carry of your pistol and light.

The Outlier is our take on a multi-fit holster. The Outlier provides secure retention by indexing on the light, rather than the gun. Each Outlier model is specific to the light you choose, but will accept a wide variety of full size pistols see list of below.

While our traditional M6 holsters are precision fit for both your gun and light, the Outlier allows us to support a much wider variety of pistols, so if you have a less prevalent gun model, the Outlier might be for you.

The M6 provides the features that modern shooters demand. The concealment claw and muzzle bump help reduce printing and enhance comfort. Precision design and manufacturing result in a perfect fit for your pistol and light. The included 1.5" belt clip supports both cant and carry height adjustment. The M6 holster can be further customized with optional accessories such as DCC clips, polymer c-hooks, snap straps, or even the Radius Mag carrier, to run it “sidecar” style.

Features

• Precision-Fit
• Adjustable Retention
• Concealment Claw
• Carry In Multiple Positions IWB
• High Sweat-guard
• Optic Ready
• Threaded Barrel Drop-through
• Werkz and Third Party Accessory Support

Concealment Claw

The pistol grip is the most likely part to show through clothing. The concealment claw pushes against your belt and secures the pistol grip into your body. This enhances the holster's concealment capabilities and further stabilizes your firearm from unwanted movement. The concealment claw is removable.

Conceal Inside the Waistband, Appendix Position (AIWB)

The holster comes with a 1.5 inch belt clip that provides an easy and secure belt mount. It can be adjusted to a fifteen different positions including two different carry heights. You can swap the belt clip out for soft loops, c-hooks, DCC clips, and more. Check related products below to see attachment options for this holster, or check our accessories.

Hip Carry Positions and Concealment

Now available in 5 different colors or patterns.

Optimize Your Carry with Available Accessories

FAQs

Q: What other pistol mods are compatible with this holster?
A: Every holster supports suppressor height sights and threaded barrels. Select holsters (see product photos) have charging ports for rechargeable lights. Most slide-profiled compensators or threaded barrels drop through without interference.

Q: How do I adjust retention?
A: You control retention with the dual adjustment screws that also attach the claw. Fine-tune them for your preferred balance between secure carry and a smooth draw.

Q: What are my belt attachment options for this holster?
A: The M6 comes with a 1.5" belt clip that provides a convenient and secure belt mount with multiple adjustment positions. You can swap the belt clip out for soft loops, c-hooks, DCC clips, and more. Check out related products or M6 accessories for more.

Compatibility List

Pistol Fit:
We have verified the following pistols to fit with the exact or nearly identical firearm. Other pistols may also fit; contact Customer Service before purchasing if your pistol is not listed. The listed pistols will fit into the holster with no modification, and many pistols fit perfectly.

Click to Expand

Light or Laser Fit:
This holster is made exactly to fit the following lights, lasers, or accessories. The holster is molded closely to the profile of these lights. Note that similar looking lights will not fit unless specifically mentioned on this page.

• X300T-A
• X300T-B
• X300
• X300U-A
• X300U-B