While I've not uploaded any new articles in a few weeks, rest assured that I have quite a few things in the works. Let me provide a quick overview.

First, I finally solved the cooling issues in the Miata. I'll have a short article on what it took.

Next, if anyone is interested, I have an article on installing a pyrometer & boost gauge setup in a Cummins Ram diesel. This was quite easy due to the foresight of Cummins.

Perhaps most interesting, I'll have an extensive article (or set of articles) on fabbing in a roll cage into a spec Miata. This is a full welded cage that I'm cutting, bending, notching, and welding in. Using 1 1/2 inch, .095 DOM tubing, it willbe up to spec requirements.

Finally, along those lines, I'll be following the rest of the development of this Miata into a spec Miata.

I have a few other projects I've documented as well, and may well put up on the site. Rest assured, I have plenty of content; I just need to get the words down on paper -- err, electrons -- and up here.

Thanks for the patience!

Shan